Electrolux Vacuum Bag Full Light Stays On? Here's How to Fix It
If the bag full indicator light on your Electrolux plastic canister vacuum cleaner stays on even after installing a new vacuum bag, the problem is usually caused by a faulty control valve.
Before replacing any parts, try the following troubleshooting steps.
Step 1: Adjust the Bag Full Indicator Dial
Many Electrolux plastic canister vacuums have an adjustment dial located on the top of the machine near the bag full indicator.
-
Install a fresh vacuum bag.
-
Turn the vacuum on.
-
Adjust the indicator dial according to your owner's manual.
-
Test the vacuum to see if the bag full light resets.
If the light continues to stay on, the control valve may need to be replaced.
Step 2: Replace the Control Valve
The control valve is located inside the vacuum canister directly beneath the bag full indicator adjustment dial. Over time, this component can wear out and cause false "bag full" readings.
To replace the control valve:
-
Follow the instructions in our guide on How to Open an Electrolux Plastic Canister Vacuum Cleaner.
-
Open the vacuum and remove the bag compartment assembly.
-
Remove the bag cage to gain access to the internal components.
-
Locate the control valve beneath the indicator dial.
-
Remove the old control valve and install the replacement part.
-
Reassemble the vacuum and test the bag full indicator.
Why the Bag Full Light Stays On
Common causes include:
-
Failed control valve
-
Incorrect bag full indicator adjustment
-
Clogged hose or wand
-
Restricted airflow
-
Full or improperly installed vacuum bag
- Vacuuming up construction dust of fine powder.
If airflow is normal and the vacuum bag has been replaced, a new control valve typically resolves the issue.
Final Thoughts
A bag full light that stays on can be frustrating, but in most cases the fix is straightforward. Start by adjusting the indicator dial, and if that doesn't work, replace the control valve inside the canister. Once the new valve is installed, the bag full indicator should operate normally again.
