When you first open your eVacuumStore shipment, you are going to be greeted with an array of parts. You have a telescopic suction wand that needs to be attached to the vacuum body, an ergonomic handle that needs to be attached to the telescopic suction wand, a FiberTeQ cleaning nozzle, a crevice tool, a upholstery tool, and finally a cable clip.
2. Attach FiberTeQ Cleaning Nozzle
Attach the FiberTeQ cleaning nozzle to the red cylindrical end of the vacuum body. You will hear a loud click to alert you that it's in place.
3. Attach Ergonomic Handle
Attach the ergonomic handle to the telescopic suction wand. The Miele logo should be facing towards the ground, and the handle should be able to be comfortably gripped from behind. You should hear a loud click to alert you that the ergonomic handle is in its proper place.
Attach your crevice tool and upholstery tool to the accessory clip wrapped around the telescopic suction wand.
5. Wrap Power Cord and Attach Cable Clip
Stand the vacuum body upright and have the backside facing towards you. Next, take the 40 ft power cord and beginning wrapping it around the two upper and lower cord hooks. When finished, attach the power cord to the cable clip to prevent it from running array.