How to Assemble the Power Team Perfect C103
Just purchased a Power Team Perfect C103 canister vacuum cleaner ? Read on through our step by step guide on how to put it all together!
1. Inventory of Parts
When you first open your eVacuumStore shipment, you are going to be greeted with an array of parts. You have an electric hose with 360-degree swivel capability, a sheath assembly, a lower steel nozzle wand, a Power Team power nozzle, a large 42-inch telescopic wand, a combination dusting brush/upholstery tool/crevice tool, and a horse hair floor brush.
2. Attach Lower Steel Nozzle Wand
Insert the smooth side of the lower steel nozzle into the white circular opening appended to the Power Team power nozzle.
3.. Attach Sheath Assembly
On one of the ends of the sheath assembly, you should be able to locate a white arrow. This is the end you should insert into the lower steel nozzle wand. If the arrow points in any other direction other than down, you are trying to insert the wrong end. In general, there is no clicking sound associated with this step, but you should recognize upon assembly that this step is designed to be a tight fit.
4. Attach Ergonomic Swivel Handle
To attach the ergonomic handle to the open end of the sheath assembly, you need to swivel the hose around until the low voltage prongs on the sheath assembly align with the outlet on the ergonomic handle. You should hear a click to signify that these two parts are properly connected.
5. Attach Swivel Hose to Canister
Attach the swivel hose to the circular opening on the canister by aligning the gold colored notch on the hose with the notch opening etched into the circle on the canister.
6. Attaching Small Cord
Insert the open end of the small 20-inch low-voltage cord into the outlet on the sheath assembly. Firmly press the other end of the cord into the power nozzle until the plug is recessed into the head. Using a pair of needle nose pliers will help with the leverage.
The final product...
Attaching On-Board Tools
1. Append Telescopic Wand to Canister
On the backside of the telescopic wand, you will see a plastic notch that needs to fit into the notch opening on the backside of the canister. You can find this opening in the same vicinity as the small gray wheel.
2. Attach Horse Hair Floor Brush
Align the white circular hole on the horse hair floor brush with the end of the telescopic wand. Gently push to attach. In the same way, find the custom-made opening on the gray accessory clip and insert the triple attachment tool into the holder.
The final product...
