Step 1: Locate and unscrew all screws holding the Hose handle together.
Step 2: Be sure to locate the clamp behind hose and undo before Proceeding to step 3.
Step 3: Remove final mounting screw below top cover.
Step 4: Locate the three terminal connections on the underside of Hose .
Step 5: Disconnect and reverse the white and blue wires on the hose NOTE: DO NOT DISCONNECT YELLOW WIRE!!
Step 6: Locate the Blue“U-shaped” wire on power switch
Step 7: reverse the Blue“U-shaped” wire contacts onto the opposite terminals.
Step 8: place all components back into handle casing and Screw handle back together.
Step 9: Plug hose into vacuum and test .
