Shark Navigator & Lift-Away Parts

Shark Navigator and Lift-Away replacement parts include hoses, HEPA and foam filters, brushrolls, floor nozzles and filter grills for Shark Navigator upright vacuums. That covers the NV350, NV351, NV352, NV353, NV355, NV356, NV357, NV365E, NV22L, NV42, NV70 and NV80, plus the Lift-Away ZU560, ZU561 and ZU562 and the Powered Lift-Away DLX.

How to find the right Shark Navigator part

Find your model number on the rating label, which is usually on the back or bottom of the vacuum (for example NV352 or ZU561).
Match that model number to the model numbers in the product titles below. Shark parts are model-specific, even within the Navigator line.
Not sure? Call our parts team at 866-972-8227 with your model number and we'll confirm the fit.

Shark Navigator parts by model

Model	Parts in this collection
NV350, NV351, NV352 (Navigator Lift-Away)	Nozzle hose, Lift-Away HEPA and foam filters, Lift-Off filter (NV352)
NV355, NV356, NV357	Hose assembly, nozzle hose
NV353, NV365E	Brushroll assemblies
NV70, NV80 (Navigator Professional)	NV70 brushroll, foam filter set, HEPA filter, XFH80 filter
NV22L (Navigator Lift-Off)	Filter kit (2 foam, 1 felt, 1 exhaust), motorized floor nozzle
NV42	Filter kit
ZU560, ZU561, ZU562 (Lift-Away)	Filter grills 507FFJ560 and 514FFJ560
Powered Lift-Away DLX	Foam filter set, HEPA filter
Navigator Swivel Pro, Navigator Zero-M	Foam and HEPA filters, pre-motor filter

Frequently asked questions

Do all Shark Navigator vacuums use the same parts?

No. Hoses, filters and brushrolls change between models. For example, the NV350–NV352 use a different nozzle hose than the NV355–NV357. Always match your exact model number before ordering.

How often should I clean or replace Shark Navigator filters?

Shark's owner manuals recommend rinsing the foam and felt pre-motor filters at least once a month and the HEPA filter at least once a year. Let them air-dry fully before reinstalling. Replace a filter when it is torn, stays discolored after rinsing, or suction stays weak after cleaning.

Why is my Shark Navigator losing suction?

The most common causes are a clogged hose, dirty filters, a full dust cup or hair wrapped around the brushroll. Check the hose and nozzle for blockages, empty the dust cup and rinse the filters. If suction is still weak, the hose may be cracked or a filter may need replacing.

Are these genuine Shark parts?

Most are genuine Shark parts. Items labeled "Generic" or "Clean Obsessed" in the title are compatible aftermarket replacements built to fit the listed models.

Need help? eVacuumStore's parts team is available at 866-972-8227, Monday–Friday 8:30am–6pm and Saturday 10am–5pm ET.