AlorAir Purecare 780S Workspace Air Filter

AlorAir Purecare 780S

The PureCare 780S is a suspension single-side air intake filtration system for woodworking garages and factory floors. It has a powerful but low-noise vortex fan and an efficient MERV-13 filter for dust, small particles, and odors. The system has a built-in powered vortex fan that delivers up to 780CFM of air, enough to clean up to 800 square feet of space, and has two wind speeds of 580CFM/780CFM, which can be.

The Purecare 780S is intended for woodworking shops, garages, production areas, and workspaces where airborne dust needs to be captured as part of a broader dust-control setup. Rather than relying on a general product category alone, compare the unit’s verified capacity, airflow, drainage, filtration, and operating requirements with the conditions at the job site.

Performance and Application

This model provides manufacturer guidance for 800 sq.ft, airflow rated at 580-780 CFM, a listed sound level of 58 dBA, and a listed power requirement of 0.9 Amps. The airflow and filtration details are especially important when estimating air changes, planning equipment placement, and establishing a filter-maintenance schedule for the application.

Match the collector to the workspace volume, dust-producing equipment, desired air-exchange rate, filter configuration, and placement. Source capture and routine housekeeping may still be required for dust that does not reach the filtration unit.

Practical Operation

AlorAir designed this model as a task-focused piece of environmental-control equipment. Product-specific controls and operating functions vary across the line, so the model number and manufacturer part number should be confirmed before ordering accessories, filters, controls, or installation components. The detailed technical data for this exact configuration appears in the specifications section of the product page.

Why Choose the Purecare 780S?

• Airflow: 580-780 CFM
• Coverage: 800 sq.ft
• Power: 0.9 Amps
• Exact AlorAir configuration identified by MPN RF02ALOS-Purecare-780S-0NNME00
• Detailed manufacturer specifications available for sizing and job planning

Choosing the Right Equipment

Performance in the field depends on more than a single capacity or airflow number. Room layout, initial moisture or particulate load, temperature, drainage access, circuit availability, filter condition, and equipment placement can all affect results. Review the specifications and operating instructions before installation, and do not assume that similarly named AlorAir models use the same filters, controls, or accessories.

Support From eVacuumStore

Choose this Purecare 780S configuration when you need the AlorAir unit identified by manufacturer part number RF02ALOS-Purecare-780S-0NNME00. eVacuumStore can help confirm product details, sizing considerations, and accessory selection before you order. Call 866-972-8227 or email support@evacuumstore.com with questions.

Part numbers and Alternate Part numbers