SKU: CV-KT400DCINST
Beam Hose Direct Connect Adapter
$12.00
/
Availability: In stock
-
Free shipping on all orders of $50+ -
Easy returns within 30 days -
For Assistance: Call (866) 972-8227
Description
Use this 2 pin direct connect adapter on your central vacuum hose to convert from a pig-tail (corded) setup to a direct connect type. This will allow you to utilize direct connect super valves with your hose. This is compatible with Beam and Beam Style Hoses.
IF YOU ARE NOT SURE WHETHER OR NOT THIS IS CORRECT FOR YOUR HOSE PLEASE CALL US AT 866-972-8227 TO CONFIRM COMPATIBILITY.
INSTALLATION
- Use a flat head screwdriver tip to depress locking tab on hose cuff (sometimes covered with a sticker)
- Slide hose cuff off the end of the hose while tab is depressed w/ screwdriver.
- Remove the 120 VAC Electrical Pig-Tail Cord by unplugging the wire leads. Use caution not to pull wires from their connector ends.
- Install Direct Connect Adapter in place where pigtail cord was unplugged from with pins facing toward the wall inlet.
- Reinstall hose cuff.
Part numbers and Alternate Part numbers
KT400DCINST
