SKU: POWR-NM2000

Powr-Flite NM2000 Millennium 20-Inch 2000 RPM Burnisher

$1,730.40

  • 20-inch, 2,000 RPM burnishing
  • X8862 flexible pad driver included
  • 1.5 HP belt-drive motor
  • 75-foot cord and safety interlock
Availability: In Stock
  • free shipping policy icon of a truck
    Free shipping on all orders of $50+
  • returns policy icon of a $ with a circle
    30 Day Returns
  • Call us for customer service icon of a phone
    For Assistance: Call (866) 972-8227
Description

The Powr-Flite NM2000 Millennium Edition is a 20-inch, 2,000 RPM burnisher for restoring and maintaining a high-gloss appearance on established floor finishes. Designed for large, open areas, it combines a flexible pad driver with balanced weight distribution to maintain pad-to-floor contact without a compensating caster.

What You Get

  • Powr-Flite NM2000 Millennium Edition burnisher
  • Included X8862 20-inch flexible pad driver
  • 75-foot power cord

A suitable 20-inch burnishing pad is required. Pads are listed as accessories; a starter burnishing pad is not confirmed as included. This is the standard NM2000, not the NM2000DC dust-control package.

Flexible Contact for Consistent Finish Care

The 1.5 HP motor and belt-drive transmission provide 2,000 RPM operation. The flexible driver follows high and low areas in the floor to help keep the pad in contact with the finish. A one-piece high-density polyethylene housing encloses the working assembly, while the full-surround non-marking bumper helps protect nearby walls and furniture from contact.

Dual operating levers work with a thumb-activated safety interlock to help prevent accidental starting. Two 5-inch non-marking operating wheels and a chrome handle tube support everyday handling. The 75-foot cord provides reach for planned floor-maintenance passes through larger spaces.

Prepare the Floor Before Burnishing

This machine maintains an existing finish; it does not replace routine cleaning. Dust mop before each use and damp clean with a neutral cleaner when needed, following the operator’s manual. Select a pad appropriate for the finish and follow the flooring and finish manufacturer’s care recommendations.

Disconnect power before pad changes or maintenance, and never leave the machine running unattended. The manual advises locking the handle for manual pad-contact control where tight, repetitive turns are necessary. Read all operating instructions before use.

The included shared specification sheet is dated January 2017. Its warranty terms differ from the current product page, and its 89 lb figure is labeled shipping weight rather than machine weight. Those details are omitted here pending confirmation.

For help selecting pads or confirming the right configuration, call 866-972-8227 or email support@evacuumstore.com.

Part numbers and Alternate Part numbers
NM2000
Product Specs
Brand / ManufacturerPowr-Flite
ModelNM2000
SeriesMillennium Edition
Pad size20 inches
Pad speed2,000 RPM
Motor1.5 HP
TransmissionBelt drive
Included pad driverX8862 flexible 20-inch pad driver
Cord75 ft, 12/3 SJTW-A
Pad pressure16 lb
HousingOne-piece high-density polyethylene
Handle tube1.5-inch chrome
Operating wheelsTwo 5-inch non-marking wheels
ControlsDual-lever on/off with safety interlock
Manufacturer-listed productivity26,000 sq. ft./hr; actual coverage varies
Features
  • 20-inch, 2,000 RPM high-speed burnishing.
  • Included X8862 flexible pad driver helps maintain full pad contact.
  • Balanced design requires no compensating caster.
  • 1.5 HP motor with belt-drive transmission.
  • One-piece high-density polyethylene housing.
  • Thumb-activated safety interlock with dual operating levers.
  • Full-surround non-marking bumper and two 5-inch operating wheels.
  • 75-foot 12/3 SJTW-A cord.
Powr-Flite NM2000 Millennium 20-Inch 2000 RPM Burnisher FAQ’s

Q: What is the NM2000 used for?
A: It maintains or restores a high-gloss appearance on an established floor finish. Dust mop and clean the floor as needed before burnishing.

Q: What size pad does it use?
A: The NM2000 uses 20-inch burnishing pads. Select a pad suited to your floor finish and follow the finish manufacturer’s recommendations.

Q: Is the pad driver included?
A: Yes. The manufacturer lists the X8862 flexible 20-inch pad driver as included. A starter burnishing pad is not confirmed as included.

Q: Is this the dust-control model?
A: No. This is the standard NM2000. The NM2000DC is a separate dust-control configuration; a dust skirt or collection package is not listed as included here.

Q: How fast does it run?
A: The NM2000 runs at 2,000 RPM. It has a 1.5 HP motor and belt-drive transmission.

Q: How long is the power cord?
A: The manufacturer lists a 75-foot 12/3 SJTW-A cord. Follow the operator’s manual for grounding and safe cord handling.

Q: How should I prepare for a pad change?
A: Disconnect the electrical plug from the outlet before changing the polishing pad. Follow the manual’s pad installation procedure, and do not leave the machine running unattended.

Downloads
Rating

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)