Sandia Sniper 12 Gal Heated Carpet Extractor 500 PSI Pump - 80-3500-H

Heated carpet extraction with a 500 PSI pump and dual 3-stage vacuum motors.

The Sandia Sniper 80-3500-H is a 12-gallon heated carpet extractor built for professional carpet-cleaning work. Its 500 PSI pump delivers cleaning solution, while dual 3-stage vacuum motors recover spent solution and loosened soil. This listing is specifically for the heated 80-3500-H, not the nonheated 80-3500 or the dual 2-stage configurations.

What’s Included

• Sandia Sniper 80-3500-H heated carpet extractor
• 500 PSI pump and dual 3-stage vacuum motors
• 2,000-watt in-line heater
• Two 25-foot safety power cords

Vacuum and solution hoses, carpet wands, and upholstery hand tools are optional accessories, not included equipment on the manufacturer page.

Heated Cleaning and Solution Recovery

The in-line heater is rated at 2,000 watts, and Sandia describes heated models as extracting with solution at 200°F. Use the appropriate temperature and cleaning chemistry for the carpet or fabric being cleaned, following the machine instructions and material care guidance.

Sandia lists vacuum performance of up to 205 inches of water lift for the Sniper range, supporting solution recovery and faster carpet drying. Actual drying time depends on the cleaning method, material, and surrounding conditions. The motor-cooling design uses the vacuum motors’ own cooling fans to draw outside air over the motors and reduce operating temperature.

Capacity and Operator-Friendly Controls

Separate 12-gallon solution and recovery tanks support longer cleaning sessions between refilling and emptying. The tanks are designed for quick filling and dumping, helping reduce downtime during a job.

Waist-high controls reduce the need to bend to operate the machine. Recessed placement helps protect the controls during use, transport, and storage. Roto-moulded polyethylene tanks are designed to resist dents, chips, and cracks in demanding working environments.

Transport and Optional Accessories

Ten-inch non-skid, non-marking wheels support movement between cleaning areas and stair handling without scuffing floors. Two 25-foot power cords are listed for this heated, dual 3-stage configuration.

Optional equipment options - 25-foot vacuum and solution hoses, a stainless-steel dual-jet S-bend carpet wand, and a 4-inch stainless-steel upholstery tool. Sandia identifies stainless-steel hand tool 10-0501 for machines with heat. Confirm the selected tools and hoses are suitable for the heated machine before ordering.

Need help choosing accessories for the 80-3500-H? Contact eVacuumStore at 866-972-8227 or support@evacuumstore.com.

Part numbers and Alternate Part numbers