Parts of a Vacuum Cleaner
The main parts of a vacuum cleaner are the motor and fan, which create suction; the brushroll and belt, which loosen dirt from carpet; the power head or nozzle that holds them; the hose and wand, which carry air and dirt; the bag or the cyclone and dust bin, which collect dirt; and the filters, which clean the air before it leaves the vacuum. The power cord or battery, switch and attachments complete the machine. Below, each part is explained with what it does and the signs it needs replacing, followed by links to parts for Shark, Bissell, Dyson, Miele, Hoover, Eureka and other brands.
Vacuum cleaner parts at a glance
| Part | What it does | Signs it needs replacing |
|---|---|---|
| Motor and fan | Creates the airflow that gives the vacuum suction | Burning smell, sparking, grinding noise, or no power with a good cord |
| Power cord or battery | Supplies power | Cut or frayed cord, power cutting in and out, or short battery run time |
| Power head (power nozzle) | Floor head that holds the brushroll and contacts the floor | Cracked housing, broken neck, or brushroll won't spin |
| Brushroll (beater bar) | Spinning brush that loosens dirt and hair from carpet | Worn or missing bristles, wobbling, or seized bearings |
| Belt | Connects the motor to the brushroll on belt-driven vacuums | Burning rubber smell, stretched or broken belt, or brushroll stops |
| Hose | Carries air and debris from the wand or nozzle to the vacuum | Cracks, splits, or suction lost at the hose |
| Wand | Extends your reach and connects attachments or the power nozzle | Bent tube, broken lock, or failed electrical contacts |
| Bag, or cyclone and dust bin | Collects the dirt | Bag full; bin cracked or leaking dust |
| Filters | Trap fine dust to protect the motor and clean the exhaust air | Dirty after washing, torn, smelly, or suction drops |
| Switch and controls | Turn the vacuum on and off and set power levels | Vacuum won't start or stop, or settings don't change |
| Attachments | Crevice tool, dusting brush and upholstery tool for detail cleaning | Lost, cracked, or worn bristles |
Motor and fan
The motor is the heart of the vacuum. It spins a fan that pulls air in through the floor head and pushes it out through the exhaust, which creates suction. Motor and fan design largely decide a vacuum's suction power. Uprights may have a second, smaller motor in the power head to drive the brushroll. Replacement motors are model-specific, for example the Miele suction motor for Classic C1, S2 and S2000 canisters. See also Sanitaire motors, Bissell motors and central vacuum motors.
Power cord or battery
Corded vacuums use a power cord. Its length sets your cleaning radius, and some canisters rewind the cord automatically. Never use a vacuum with a cut or frayed cord. Shown here is the SEBO X4 power cord for the SEBO Automatic X4. Cordless stick vacuums use a rechargeable battery instead; see Shark batteries and chargers.
Power head (power nozzle)
The power head, also called the power nozzle, floor head or cleaner head, is the part that rolls along the floor. It holds the brushroll and, on many models, a height adjustment for different carpet piles, a clog port for clearing blockages, and a headlight. Canister vacuums often use an electric power nozzle that plugs into the wand, such as the Miele SEB236 Electro Premium power head. See also SEBO power nozzle parts and Electrolux power nozzle parts.
Brushroll (beater bar)
The brushroll, also called a roller brush, agitator or beater bar, is a spinning cylinder of bristles inside the power head. It loosens dirt and pet hair from carpet so suction can pick them up. Many vacuums let you turn it off for bare floors to avoid scratching. Cut away wrapped hair regularly, and replace the brushroll when the bristles are worn short. Shop Shark brushrolls or Bissell brushrolls such as the PowerForce bagless brushroll.
Belt
On belt-driven uprights and power nozzles, a rubber belt connects the motor shaft to the brushroll. Belts stretch and wear out, so they're one of the most commonly replaced vacuum parts. A burning rubber smell or a brushroll that stops spinning usually means the belt has slipped or broken. Shop Bissell belts, Dirt Devil belts and Beam belts.
Hose
The hose carries air and debris from the nozzle or wand to the vacuum body. Canisters and backpacks use a hose for all cleaning; many uprights have an on-board hose for tools. A cracked hose or a clog inside it is a common cause of lost suction. Shown here is the SEBO 9 ft 2 in extension hose, which adds reach to SEBO uprights such as the Essential G4. See also Bissell hoses and central vacuum hoses.
Wand
The wand is the rigid tube between the hose and the floor tool or attachment. Telescopic wands adjust to your height and extend to reach ceilings and stairs. Electric wands carry power to a motorized power nozzle. Shown here is the Miele SET220 telescopic electric wand for Miele canisters with electric power nozzles. See all Miele canister parts.
Bag, or cyclone and dust bin
Bagged vacuums collect dirt in a disposable bag that seals dust in when you throw it away, which is a good choice for allergy sufferers. Bagless vacuums use a cyclone that spins dirt out of the airflow into a clear dust bin that you empty. Shop Miele bags, SEBO bags or Dyson cyclone and bin parts.
Filters
Most vacuums have two filters. The pre-motor filter sits before the motor and catches fine dust that gets past the bag or cyclone, protecting the motor. The post-motor or exhaust filter cleans the air before it leaves the vacuum. A true HEPA filter captures 99.97% of particles as small as 0.3 microns, so dust and allergens stay inside the vacuum. Shown here is the Miele SF-HA50 HEPA AirClean filter. Shop Miele, Shark, Dyson and SEBO filters.
Switch and controls
The on/off switch may be on the handle, on the body, or a foot pedal on canisters. Higher-end models add suction settings and electronic displays that warn when the bag is full or a filter needs attention. Shown here are the handle controls on a Miele canister.
Attachments
Standard attachments are the crevice tool for narrow gaps and baseboards, the dusting brush for blinds, shelves and furniture, and the upholstery tool for sofas, mattresses and drapes. Many vacuums store them on board. Shown here is the tool set that comes with most Miele canister vacuums.
Find parts for your vacuum brand
| Brand | Parts |
|---|---|
| Shark | Shark vacuum parts · Navigator & Lift-Away parts · brushrolls · filters |
| Bissell | Bissell repair parts · carpet cleaner parts · belts · hoses |
| Dyson | Dyson repair parts · filters |
| Miele | canister parts · upright parts · stick vacuum parts · bags · filters |
| Electrolux | canister parts · commercial upright parts · cordless parts · central vacuum parts |
| Hoover | Hoover repair parts |
| Eureka | Eureka parts |
| Kenmore | Kenmore parts |
| Oreck | Oreck repair parts · Orbiter parts |
| SEBO | power nozzle parts · bags · filters |
| Sanitaire | Sanitaire replacement parts |
| ProTeam | ProForce 1500XP/1200XP parts · QuietPro backpack parts |
| Dirt Devil | Dirt Devil parts |
| Beam (central vacuum) | Beam parts · power nozzle parts |
Frequently asked questions
What are the main parts of a vacuum cleaner?
The motor and fan, power head, brushroll, belt, hose, wand, bag or cyclone and dust bin, filters, power cord or battery, switch, and attachments.
What is the most commonly replaced vacuum part?
Bags, filters and belts wear out with normal use and are replaced most often, followed by brushrolls and hoses.
How do I find the right part for my vacuum?
Find the model number on the label on the bottom or back of your vacuum, then search for it or browse your brand's parts in the table above. Parts are model-specific, so match the model number exactly.
Why did my vacuum lose suction?
The most common causes are a full bag or dust bin, a clogged filter, or a blockage in the hose, wand or power head. Check those first. If the brushroll isn't spinning, the belt may be broken.
What is the difference between a brushroll and a beater bar?
They're the same part. Brushroll, beater bar, roller brush and agitator are all names for the spinning brush in the vacuum's floor head.
Can't find your part? Call our parts experts at 866-972-8227, Monday–Friday 8:30am–6pm and Saturday 10am–5pm ET.